| Teknetics |
| Bounty Hunter |
| DetectorPro |
| Fisher |
| Garrett |
| Minelab |
| Sun Ray |
| Coiltek |
| Books & Videos |
| Apparel |
| Carry Bags |
| Digging Tools |
| Headphones |
| Pinpointers |
| Parts & Accessories |
| Homepage |
Metal Detector Parts & Accessories

| Item | Price | Order Here | ||
| Metal Detector Ring Display Case | ![]() |
This case will hold up to 72 rings.It has a glass top. You can move the case and never worry about losing any of your rings. Also the top keeps your rings clean and free of dust. The frame and top are black with red ring pad. This is a real nice case. | $16.95 | Order Here |
| Spring Clips (2 Pack) | ![]() |
This is a pack of 2 spring clips. Used to make adjustments on shaft length. | $3.40 | Order Here |
| Detecting Gloves | ![]() |
These are cotton jersery with a plastic exterior coating. Coating does not cover palm area. Can also be used for other activities | $4.95 | Order Here |
| Swingy Thingy | ![]() |
The New SWINGY
THINGY and HEAVY DUTY Claim Jumper Quick Adjust Bungee The GREATEST BUNGEE in the WORLD! Does your arm get tired swinging your Explorer, Sovereign, Excalibur, SD2200d, GP Extreme, Whites, Fisher, Garretts ? WHAT ARE YOU WAITING FOR ? |
$31.85 | Information & Ordering |
Battery Holders |
||||
| Battery Holder 4AA | ![]() |
This holder has a transistory style connector. | $5.00 | Order Here |
| Battery Holder 4AA (Long) | ![]() |
This battery holder will hold 4 AA batteries. Transistor style connector. | $5.00 | Order Here |
| Battery Holder 6AA | ![]() |
This battery holder has output terminals that are the same as a 9 volt battery. This will fit some old Whites models and a large variety of other applications. | $5.00 | Order Here |
| Battery Holder 6AA Long | ![]() |
This battery holder has output terminals that are the same as a 9 volt battery. This will fit some old Whites models and a large variety of other applications. | $5.00 | Order Here |
| Battery Holder 8AA | ![]() |
This holder has transistor style connector. | $5.00 | Order Here |
| Battery Holder 10AA | ![]() |
Holds 10 AA batteries. Works in some Fisher metal detectors and other applications. Transistor radio style connector on the top. | $5.95 | Order Here |
| Battery Holder 10AA Solder | ![]() |
This battery holder has sloder lug connectors. This will fit a large variety of applications. | $5.00 | Order Here
|
![]()
![]()
![]()
Fisher Parts and Accessories |
||||
| Fisher Foam Handle Grip (Water) | ![]() |
Foam grip for Fisher metal detectors (water machines) | $5.99 | Order Here |
| Fisher Foam Handle Grip (Land) | ![]() |
This is the foam cover that goes over the handle . Fisher replacement part for all land machines. If yours worn or damaged this is for you. | $6.99 | Order Here |
| Fisher CZ 20 Handle | ![]() |
I bought these as new from my distributor. They don't look pristine to me so I am listing them as refurbised. You get two halves, right and left, just like in the picture. Thanks for looking. | $14.99 | Order Here |
Fisher F75 & F70 Battery Door |
![]() |
Did you break or lose you battery door? Need a spare? Here it is!! |
$6.95 | Order Here |
| Fisher CZ-20 Mounting Plate | ![]() |
This is a replacement mounting plate for the CZ-20. It is mounted on top of the handle. If yours is lost or damaged this will get you back in the water. | $9.99 | Order Here |
| Fisher 1280-X Mounting Plate | ![]() |
This is a replacement mounting plate 1280-X. It is mounted to the top of the habdle. If yours is lost or damaged this will get you back in the water. | $9.99 | Order Here |
| Fisher CZ-20/CZ-21 & 1280 Battery Door Gasket | ![]() |
This is a replacement gasket. If yours is damaged or torn this will get you back in the water. | $9.99 | Order Here |
| Fisher CZ 20 Battery Holder | ![]() |
This is the CZ-20 battery holder that connects to four 9 volt batteries. Also fits the CZ-21. | $37.50 | Order Here |
| Fisher F75 Arm Strap | ![]() |
This arm strap fits the F-75. Put it on or take it off as you see fit. Comes with installation sheet, direct from Fisher. | $12.95 | Order Here |
Fisher F75 Rain Cover 2 piece (metal detector) |
![]() |
This is a two piece enviromental cover for the F75. One cover protects the meter while the second protects the battery compartment. | $18.95 | Order Here |
| Fisher Upper Shaft Assembly | ![]() |
This upper shaft is for Fisher CZ and 1200 Series Models. Fits the
following Models: |
$72.00 | Order Here |
| 26" Lower Shaft For Fisher, Teknetics and all Bounty Hunter models | Extended 26" length shaft for Fisher, Bounty Hunter and Teknetics models. This shaft is standard for Bounty Hunter Models. Many users find it easier to switch shafts rather then remounting coils. Includes coil mounting hardware. Please specify your detector model. |
$23.95 | Order Here | |
| Fisher Lower Shaft (CZ & 1200-X Series) | This lower shaft is for Fisher CZ and 1200 Series Models. Comes with washer and plastic hardware. |
$20.95 | Order Here | |
Lower Shaft For Fisher F2 and all Bounty Hunter Models |
![]() |
Replacment shaft for Fisher F2 and all Bounty Hunter models. Many users find it easier to switch shafts rather then remounting coils. Includes coil mounting hardware. | $19.95 | Order Here |
| Fisher Metal Detector Center Shaft | ![]() |
New Fisher Center Shaft | $28.00 | Order Here |
![]()
![]()
Garrett Parts and Accessories |
||||
| Garrett Gold Panning Kit | ![]() |
There are a variety of gold pans on the market, but only Garrett's Gravity Trap Pan series offers the world's only patented, 90° riffled design that ensures rapid gold recovery in wet or dry conditions. All Garrett pans are lightweight, green for enhanced gold nugget visibility and virtually indestructible for years of gold panning. Tested and proven worldwide to find gold, Garrett's gold pans are a must for every electronic prospector. Garrett Gold Pan Kit (PN 1651300) contains the folowing items. 14" Prospector |
$29.25 | Order Here |
| Garrett Coil Mounting Hardware | ![]() |
Garrett Coil Mounting Harware Prevent coil movement with a new set of coil harware. |
$6.25 | Order Here |
| Garrett Metal Detector Lower Shaft | Garrett lower shaft. Fits most models. Many people find it easier to switch shafts than change coils. | $14.95 | Order Here | |
| Garret Metal Detector Center Shaft | Center shaft for Garrett metal detector. Length is 18 1/2". | $18.95 | Order Here | |
Minelab Parts and Accessories |
|||||
Coil Tek Protective Cover for Minelab SD Machines Green |
![]() |
Neoprene protective cover for SD machines. Features strap across the arm cuff to hold your arm in place and make your detector easier to swing. Stretches over your Signal enhancer to protect it too! | $49.00 | Order Here | |
Coil Tek Protective Cover for Minelab GP Machines Blue |
![]() |
Neoprene protective cover for GP Extreme. Stretches over your Signal enhancer to protect it too! | $49.00 | Order Here | |
| Minelab Lower Shaft | ![]() |
Fits SD,
GP, GPX, Soverign, Musketeer, Eureka, XT. Includes (2) tear drop washers, nut
and bolt. Minelab PN 3011-0172 |
$49.95 | Order Here | |
| Minelab Lower Shaft - Composite Fibre | ![]() |
Composite Fibre
Shaft For Etrac, Safari, Explorer Minelab PN 3011-0205 |
$68.00 | Order Here | |
|
Minelab Lower Shaft Composite Fibre (Tall Man) |
![]() |
Composite Fibre
Shaft Approx. 24" Long For Etrac, Safari, Explorer Minelab PN 3011-0204 |
$75.00 | Order Here | |
|
Minelab Xterra Lower Shaft (Short) |
![]() |
Fits Compatible Metal Detectors Minelab PN 3011-0173 About 18" Long |
$42.00 | Order Here | |
|
Minelab Xterra Lower Shaft |
![]() |
Fits Compatible Metal Detectors Minelab PN 3011-0177 |
$42.00 | Order Here | |
| Minelab Lower Shaft by CoilTek | This heavy duty lower rod is 24 inches long! Fits SD and GP machines. Also fits Sovereign, Musketeer, Eureka Gold, and XT's. | $59.95 | Order Here | ||
Minelab Long Lower Shaft by Coiltek |
This heavy duty lower rod is 28 inches long! Fits SD and GP machines. Also fits Sovereign, Musketeer, Eureka Gold, and XT's. | $69.95 | Order Here | ||
Minelab Black Nylon Nut & Bolt Coil Mounting Hardware |
![]() |
Minelab Black Nylon Nut & Bolt |
$3.95 | Order Here | |
Minelab Nut & Bolt Coil Mounting Hardware for 8" Coils |
![]() |
Minelab Nut & Bolt Coil Mounting Hardware for
8" Coils |
$3.95 | Order Here | |
Minelab Nut & Bolt Coil Mounting Hardware for 10" Coils |
![]() |
Minelab Nut & Bolt Coil Mounting Hardware for
10" Coils |
$3.95 | Order Here | |
Rain Jacket for Minelab Explorer, Quattro and Safari |
![]() |
|
$14.95 | Order Here | |
| Rain Jacket for E-Trac | ![]() |
Protect your E-Trac with this new Rain Jacket. Keeps rain, dust, mud, etc. from damaging the LCD display and internal parts of the control housing! Eliminates LCD display scratches! Made from UV stabilized urethane coated nylon. Full view plastic face allows access to all controls and allows easy viewing of LCD display. Fits snugly over control housing and is secured by two sturdy velcroed web straps. |
$15.95 | Order Here | |
Minelab Arm Rest Strap for X-TERRA |
![]() |
Minelab Arm Rest Strap for X-TERRA |
$9.99 | Order Here | |
| Minelab Carry Bag | ![]() |
Minelab Carry Bag for all models. |
$57.44 | Order Here | |
| Minelab Hip Mount Bag | ![]() |
Compatible Metal Detectors PN 3011-1180 |
$48.00 | Order Here | |
| Minelab Excalibur Hip Mount Kit | ![]() |
" DETECT LONGER WITH LESS ARM FATIGUE! " |
$54.95 | Order Here | |
Minelab 110V NIMH Battery Mains Charger |
![]() |
Minelab
110V Battery Mains Charger AC/DC Adaptor Input: 110V AC 60Hz Output: 15V DC 100mA Fits Eureka Gold, Safari, Explorer SE Pro, E-TRAC, Musketeer Advantage and Sovereign GT. Part Number 78-0302-0016 |
$14.95 | Order Here | |
Minelab 110V NICAD Battery Mains Charger |
![]() |
Fits: |
$14.95 | Order Here | |
|
Minelab 12V NiMH Car Charger |
![]() |
Compatible
Metal Detectors
Minelab PN 3011-0211 |
$83.00 | Order Here | |
Minelab 1600 mA/H NiMH Battery Pack |
![]() |
Compatible
Metal Detectors: E-TRAC Safari Explorer SE Pro Explorer SE Explorer II Quattro MP Explorer XS Explorer S Part Number 3011-0196 |
$80.44 | Order Here | |
| Minelab Ball Cap | ![]() |
Red embroidered Minelab logo on navy blue hat. vented fabric construction. One size fits all. | $30.00 | Order Here | |
| Minelab X-TERRA Pro Pack | ![]() |
Minelab X-TERRA Pro Pack Includes: 1.)Minelab 10" x 5" Elliptical DD 18.75 KHz Coil This metal detector coil has great sensitivity, good ground coverage and is easy to use in rough terrain. An ideal gold hunting coil, that also performs well for beach work. Compatible Metal Detectors: Water Protection
2.) Minelab Metal Detector Carry Bag Fits all Minelab detectors. Part Number 3011-0094
|
$240.00 | Order Here | |
Detector Pro Parts and Accessories |
||||
| Detector Pro Lower Shaft | New replacement lower shaft. | $19.95 | Order Here | |
| Detector Pro Shaft Assembly | If you have a DetectorPro Probe and want to convert it into a detector all you need is this shaft assembly. This, like all DetectorPro products, is a high quality shaft. | $79.99 | Order Here | |
Teknetics and Bounty Hunter Parts and Accessories |
||||
| Teknetics T2 Rain Cover - 2 Piece | ![]() |
This is a two piece enviromental cover for the T2. One cover protects the meter while the second protects the battery compartment. Keep your T2 clean !!! Thanks for looking. | $18.95 | Order Here |
| Rain Cover for Bounty Hunter | ![]() |
This is an enviromental cover for
Bounty Hunter detectors. Designed for units with a front face headphone jack. Use with
headphones that have a 90 degree jack. Full length velcro enclosure |
$14.95 | Order Here |
| 26" Lower Shaft For Fisher, Teknetics and all Bounty Hunter models | Extended 26" length shaft for Fisher, Bounty Hunter and Teknetics models. This shaft is standard for Bounty Hunter Models. Many users find it easier to switch shafts rather then remounting coils. Includes coil mounting hardware. Please specify your detector model. |
$23.95 | Order Here | |
| Bounty Hunter Lower Shaft | ![]() |
This is a replacement 20" lower shaft for Bounty Hunter metal detectors. | $19.95 | Order Here |
![]()
![]()