|Fully compatible with all Prizm series and Coinmaster/Coinmaster Pro
|Accurate "bulls eye" pinpointing on coin size targets up to
3"+ deep depending on target size, target orientation, conductivity, detector used,
settings, ground and moisture conditions! |
NEW! Lighter weight, waterproof/submersible 6" X 1" diameter
probe mounts on top of upper shaft. PZ-1 probe and cable weigh approx. 5 oz. PZ-1 switch
box, connectors, cable and probe clip, etc. weigh approx. 5 oz. - approx. 10 oz
New red Probe Tip Cover installed to prevent
wear and tear on the probe tip. Replacement covers available from your authorized,
stocking Sun Ray Dealer.
While the PZ-1 probe is waterproof the switch box is water
resistant and must not be submersed.
PZ-1 incorporates all of the same functions as the
stock coil including accurate visual and audible target ID (if the detector model provides
those functions) along with identical pinpoint functions! (Depth reading will be off due
to the probe's small diameter which is normal.)
High quality custom made, durable probe and connector
cable used for precision performance. Probe incorporates a very flexible heavy duty custom
32" straight cable with strain relief for "tangle free" operation.
Quality high performance toggle switch used for peak
performance! (Minimum 100,000 mechanical life operation-as described
in manufacturer's specs)
Toggle switch shuts off coil as it turns probe on and
vise versa. Coil and probe are never on at the same time.
PZ-1 switch box is conveniently mounted on detector
pole attachment in a neutral position (for both right and left hand
users) and to prevent toggle from being accidentally switched or bumped by user or
damaged by tree limbs, brush, etc. if switch box is brushed or hit during detecting.
No external buzzers, vibrators or lights are needed as
all target responses are heard clearly through your detector headphones!
No extra batteries required as the PZ-1 utilizes the
detectors power source.
Complete installation & operation instructions